2023
- Mathews, Ritin, Kishore Mysore Nagaraja, Runyu Zhang, Sumair Sunny, Haoliang Yu, Deon Marais, Andrew Venter, Wei Li, Hongbing Lu, and Arif Malik, “Temporally continuous thermofluidic-thermomechanical coupling framework for metal additive manufacturing,” International Journal of Mechanical Sciences (2023)
- Seger, Michael, Ritin Mathews, Deon Marais, Andrew M Venter, Jeremiah Halley, Jyhwen Wang, and Arif Malik, “Contribution of inherent residual stress in wrought aluminum 7050-T7451 plate on the distortion of high aspect ratio machined parts,” Journal of Manufacturing Science and Engineering (2023) (In Revision)
- Sadeh, Sepehr, Ritin Mathews, Runyu Zhang, Sumair Sunny, Deon Marais, Andrew M Venter, Wei Li, and Arif Malik, “Interlayer machining effects on microstructure and residual stress in directed energy deposition of stainless steel 316L,” Journal of Manufacturing Processes (2023)
2022
- Li, Benquan, Runyu Zhang, Arif Malik, Wei Li, “Machinability of Partition Milling Stainless Steel/Inconel Functionally Gradient Material Printed with Directed Energy Deposition,” The International Journal of Advanced Manufacturing Technology (2022)
- Patel, Akash, Arif Malik, Ritin Mathews, “Computational Method to Predict 3D Chatter Vibration in Cold Rolling of Flat Metals,” Journal of Manufacturing Science and Engineering (2022)
- Patel, Akash, Arif Malik, Feng Zhang, and Ritin Mathews. “Influence of work-roll grinding error and high-fidelity corrective grinding in cold sheet rolling.” The International Journal of Advanced Manufacturing Technology (2022)
- Gleason, Glenn, Karl Bailey, Sumair Sunny, Arif Malik and Rodrigo A Bernal. “Influence of surface roughness on transient phenomena occurring during laser impact welding.” Journal of Manufacturing Processes 80 (2022): 480-490.
- Gleason, Glenn, Sumair Sunny, Ritin Mathews, and Arif Malik. “Numerical investigation elucidating effects of microstructure on the transient thermomechanical phenomena during laser impact welding.” Journal of Manufacturing Processes 79 (2022): 115-125.
- Sunny, Sumair, Ritin Mathews, Haoliang Yu, and Arif Malik. “Effects of microstructure, inherent stress, and temperature when predicting residual stress induced during hybrid powder bed fusion with roller burnishing.” International Journal of Mechanical Sciences (2022)
- Patel, Akash, Arif S. Malik, and Ritin Mathews. “Efficient 3D Model to Predict Time History of Structural Dynamics in Cold Rolling Mills.” Journal of Manufacturing Science and Engineering (2022): 1-44.
- Gleason, Glenn, Sumair Sunny, Ritin Mathews, and Arif Malik. “Numerical investigation of the transient interfacial material behavior during laser impact welding.” Scripta Materialia 208 (2022): 114325.
- Mathews, Ritin, Sumair Sunny, Arif Malik, and Jeremiah Halley. “Coupling between inherent and machining-induced residual stresses in aluminum components.” International Journal of Mechanical Sciences (2022): 106865.
2021
- Marais, Deon, Michael B. Seger, Arif S. Malik, Andrew M. Venter. “Residual stress in a thick Al 7050 T7451 plate.” 10th International Conference on Mechanical Stress Evaluation by Neutron and Synchrotron Radiation – MECASENS 2021, 25-28 November 2021, Prague, Czech Republic.
- Wu, Shiwen, Dezhao Huang, Haoliang Yu, Siyu Tian, Arif Malik, Tengfei Luo, and Guoping Xiong. “Molecular Understanding of the Effect of Hydrogen on Graphene Growth by Plasma-Enhanced Chemical Vapor Deposition.” Physical Chemistry Chemical Physics (2021).
- Zhang, Feng, and Arif S. Malik. “Stochastic Method to Predict Effects of Roll Grinding Deviations on Sheet Flatness in Cold Rolling.” Journal of Manufacturing Science and Engineering (2021): 1-34.
- Zhang, Feng, and Arif S. Malik. “An Efficient Multi-Scale Modeling Method that Reveals Coupled Effects Between Surface Roughness and Roll-Stack Deformation in Cold Sheet Rolling.” Journal of Manufacturing Science and Engineering 143, no. 10 (2021): 101005.
- Sadeh, Sepehr, and Arif Malik. “Investigation into the effects of laser shock peening as a post treatment to laser impact welding.” Materials & Design 205 (2021): 109701.
- Sunny, Sumair, Ritin Mathews, Glenn Gleason, Arif Malik, and Jeremiah Halley. “Effect of metal additive manufacturing residual stress on post-process machining-induced stress and distortion.” International Journal of Mechanical Sciences 202 (2021): 106534.
- Sunny, Sumair, Glenn Gleason, Karl Bailey, Ritin Mathews, and Arif Malik. “Importance of microstructure modeling for additively manufactured metal post-process simulations.” International Journal of Engineering Science 166 (2021): 103515.
- Yu, Haoliang, Umberto Ciri, Arif Malik, and Stefano Leonardi. “A simplified model for drag evaluation of a streamlined body with leading-edge damage.” Journal of Turbulence 22, no. 10 (2021): 656-679.
- Sunny, Sumair, Glenn Gleason, Karuna Sitaula, and Arif Malik. “Predictive Modeling of Laser Shock Peening Induced Near-Surface Residual Stress in Alumina.” Procedia Manufacturing 53 (2021): 80-91.
2020
- Sunny, Sumair, Glenn Gleason, Ritin Mathews, and Arif Malik. “Simulation of laser impact welding for dissimilar additively manufactured foils considering influence of inhomogeneous microstructure.” Materials & Design 198 (2021): 109372.
- Sunny, Sumair, Haoliang Yu, Ritin Mathews, and Arif Malik. “A predictive model for in situ distortion correction in laser powder bed fusion using laser shock peen forming.” The International Journal of Advanced Manufacturing Technology 112, no. 5 (2021): 1319-1337.
- Yu, Haoliang, Umberto Ciri, Stefano Leonardi, and Arif Malik. “A simplified model for drag evaluation of a streamlined body with surface roughness.” In APS Division of Fluid Dynamics Meeting Abstracts, pp. Q05-015. 2020.
- Sunny, Sumair, Huiluo Chen, Arif Malik, and Hongbing Lu. “Influence of residual stress and fluid–structure interaction on the impact behavior of fused filament fabrication components.” Additive Manufacturing 37 (2021): 101662.
- Sunny, Sumair, Haoliang Yu, Ritin Mathews, Arif Malik, and Wei Li. “Improved grain structure prediction in metal additive manufacturing using a dynamic kinetic Monte Carlo framework.” Additive Manufacturing 37 (2021): 101649.
- Yu, Haoliang, Umberto Ciri, Arif S. Malik, and Stefano Leonardi. “Decoupled effects of localized camber and spanwise bending for flexible thin wing.” AIAA Journal 58, no. 5 (2020): 2293-2306.
- Gleason, Glenn, Sumair Sunny, Sepehr Sadeh, Haoliang Yu, and Arif Malik. “Eulerian Modeling of Plasma-Pressure Driven Laser Impact Weld Processes.” Procedia Manufacturing 48 (2020): 204-214.
2019
- Sadeh, Sepehr, Glenn H. Gleason, Mohammad I. Hatamleh, Sumair F. Sunny, Haoliang Yu, Arif S. Malik, and Dong Qian. “Simulation and experimental comparison of laser impact welding with a plasma pressure model.” Metals 9, no. 11 (2019): 1196.
- Yu, Haoliang, Umberto Ciri, Arif Malik, and Stefano Leonardi. “Direct numerical simulation for irregular roughness on a curved surface.” In APS Division of Fluid Dynamics Meeting Abstracts, pp. P42-008. 2019.
- Hatamleh, Mohammad I., Jagannathan Mahadevan, Arif Malik, Dong Qian, and Radovan Kovacevic. “Prediction of residual stress random fields for selective laser melted A357 aluminum alloy subjected to laser shock peening.” Journal of Manufacturing Science and Engineering 141, no. 10 (2019).
- Sunny, Sumair F., Glenn H. Gleason, and Arif S. Malik. “Comparison of numerical methods for fluid-structure interaction simulation of fused deposition modeled nylon components.” Procedia Manufacturing 34 (2019): 516-527.
- Yu, Haoliang, Wuwei Yang, Haonan Duan, and Arif Malik. “Flexibility Distribution Tuning by Wing Frame Inner Structure Morphing for Fixed-Wing Unmanned Aerial Vehicle.” In AIAA Aviation 2019 Forum, p. 3348. 2019.
2018
- Hatamleh, Mohammad I., Jagannathan Mahadevan, Arif Malik, and Dong Qian. “Variable damping profiles using modal analysis for laser shock peening simulation.” Journal of Manufacturing Science and Engineering 140, no. 5 (2018).
- Zhang, Feng, and Arif Malik. “A roll-stack contact mechanics model to predict strip profile in rolling mills with asymmetric, continuously variable crown rolls.” Journal of Manufacturing Science and Engineering 140, no. 1 (2018).
- Karim, Mohammad Rezaul, Micheal Kattoura, Seetha R. Mannava, Vijay K. Vasudevan, Arif S. Malik, and Dong Qian. “A computational study on the microstructural evolution in near-surface copper grain boundary structures due to femtosecond laser processing.” Computational Mechanics 61, no. 1 (2018): 105-117.
- Sunny, Sumair F., Saman Rostami, and Arif S. Malik. “Effects of Fluid Cavity Modeling When Predicting Compressive Strength of FDM Printed Nylon With Varying Infill Pattern and Density.” In International Manufacturing Science and Engineering Conference, vol. 51357, p. V001T01A010. American Society of Mechanical Engineers, 2018.
- Hatamleh, Mohammad I., Sepehr Sadeh, Tayyub Farooq, Arif S. Malik, and Dong Qian. “Finite Element Study of Laser Peening on Selective Laser Melted A357 Aluminum Alloy During Tension Test.” In International Manufacturing Science and Engineering Conference, vol. 51388, p. V004T03A046. American Society of Mechanical Engineers, 2018.
- Zhang, Feng, Arif S. Malik, and Haoliang Yu. “High-fidelity roll profile contact modeling by simplified mixed finite element method.” In International Manufacturing Science and Engineering Conference, vol. 51388, p. V004T03A034. American Society of Mechanical Engineers, 2018.
- Yu, Haoliang, Michael Seger, and Arif Malik. “Wing frame design and strain tuning for optimum endurance of flexible fixed-wing micro air vehicles.” In 2018 AIAA/AHS Adaptive Structures Conference, p. 1287. 2018.
Prior to 2017
- Hatamleh, Mohammad I., Jagannathan Shankar Mahadevan, Arif S. Malik, and Dong Qian. “Variable damping profiles for laser shock peening simulation using modal analysis and the SEATD method.” In International Manufacturing Science and Engineering Conference, vol. 50725, p. V001T02A032. American Society of Mechanical Engineers, 2017.
- Zhang, Feng, and Arif S. Malik. “An Efficient Reliability-Based Method for Simulating Strip Crown in CVC Mills.” Proceedings of the 2017 AIST Iron & Steel Conference, AISTECH2017, May 8-11, 2017, Nashville, TN, USA
- Zhang, Feng, and Arif S. Malik. “Efficient Prediction of Contact Behavior in a 6-High Rolling Mill With Continuously Variable Crown Intermediate Rolls.” In International Manufacturing Science and Engineering Conference, vol. 50725, p. V001T02A041. American Society of Mechanical Engineers, 2017.
- Hasser, Peter J., Arif S. Malik, Kristina Langer, Thomas J. Spradlin, and Mohammad I. Hatamleh. “An efficient reliability-based simulation method for optimum laser peening treatment.” Journal of Manufacturing Science and Engineering 138, no. 11 (2016).
- Combes, Thomas P., Arif S. Malik, Götz Bramesfeld, and Mark W. McQuilling. “Efficient fluid-structure interaction method for conceptual design of flexible, fixed-wing micro-air-vehicle wings.” AIAA Journal 53, no. 6 (2015): 1442-1454.
- Bramesfeld, Götz, and Arif Malik. “Micro Aerial Vehicles in Confined Spaces: Are Two Wings Better than One?.” Journal of Aircraft 52, no. 5 (2015): 1575-1585.
- Vance, Samuel M., and Arif S. Malik. “Analysis of factors that may be essential in the decision to fly on fully autonomous passenger airliners.” Journal of Advanced Transportation 49, no. 7 (2015): 829-854.
- Zhang, Feng, and Arif S. Malik. “Strip Flatness Mechanism Analysis in Single-Stand Cold Mills.” In International Manufacturing Science and Engineering Conference, vol. 56826, p. V001T02A039. American Society of Mechanical Engineers, 2015.
- Nelson, Andrew W., Arif S. Malik, John C. Wendel, and Mark E. Zipf. “Probabilistic force prediction in cold sheet rolling by Bayesian inference.” Journal of Manufacturing Science and Engineering 136, no. 4 (2014).
- Yang, Shu, Arif Malik, and Yao-Jan Wu. “Travel time reliability using the Hasofer–Lind–Rackwitz–Fiessler algorithm and kernel density estimation.” Transportation Research Record 2442, no. 1 (2014): 85-95.
- Nelson, Andrew W., Feng Zhang, Arif S. Malik, and Mark E. Zipf. “Sizing Design for 4-High Cold Rolling Mills.” In International Manufacturing Science and Engineering Conference, vol. 45813, p. V002T02A049. American Society of Mechanical Engineers, 2014.
- Yang, Shu, Arif Malik, and Yao-Jan Wu. “Travel time reliability estimation using Hasofer-Lind-Rackwitz-Fiessler Algorithm and kernel density estimation.” Transportation Research Board 93rd Annual Meeting (TRB paper #14-3545), January 12-16, 2014, Washington, D.C.
- Wendel, John C., Andrew W. Nelson, Arif S. Malik, and Mark E. Zipf. “Bayesian-based probabilistic force modeling in cold rolling.” In International Manufacturing Science and Engineering Conference, vol. 55454, p. V001T01A036. American Society of Mechanical Engineers, 2013.
- Hasser, Peter J., Arif S. Malik, Kristina Langer, and Thomas J. Spradlin. “Simulation of Surface Roughness Effects on Residual Stress in Laser Shock Peening.” In International Manufacturing Science and Engineering Conference, vol. 55454, p. V001T01A038. American Society of Mechanical Engineers, 2013.
- Combes, Thomas P., Feng Zhang, Matthew Hackett, Arif Malik, and Goetz Bramesfeld. “Performance Reliability Assessment of a Flexible Wing Micro Air Vehicle using an Efficient Fluid-Structure Interaction Method.” In 31st AIAA Applied Aerodynamics Conference, p. 2790. 2013.
- Malik, Arif S., and Jantzen L. Hinton. “Displacement of multiple, coupled Timoshenko beams in discontinuous nonlinear elastic contact, with application to rolling mills.” ASME Journal of Manufacturing Science and Engineering, 2012, Vol. 134, No. 5, pp. 051009-1 to 051009-10.
- Combes, Thomas, Goetz Bramesfeld, and Arif Malik. “Efficient Fluid-Structure Interaction Method for Optimization of Micro Air Vehicle Wings.” In 12th AIAA Aviation Technology, Integration, and Operations (ATIO) Conference and 14th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, p. 5582. 2012.
- Combes, Thomas, Arif Malik, and Gotz Bramesfeld. “Fluid-structure interaction simulation for the design of bio-inspired micro air vehicle wings.” In 30th AIAA Applied Aerodynamics Conference, p. 2764. 2012.
- Malik, Arif, John Wendel, Mark Zipf, and Andrew Nelson. “A Reliability-Based Approach to Flatness Actuator Effectiveness in 20-High Rolling Mills.” In International Manufacturing Science and Engineering Conference, vol. 54990, pp. 335-344. American Society of Mechanical Engineers, 2012.
- Hinton, Jantzen L., Arif S. Malik, and Ramana V. Grandhi. “An airy function to rapidly predict stresses in wound metal strip having asymmetric thickness profile.” International Journal of Mechanical Sciences 53, no. 10 (2011): 827-838.
- Malik, Arif, Xiaopeng Lai, and Kristina Langer. “Residual stress and wave reflectivity when laser peening thin curved sections.” In ASME International Mechanical Engineering Congress and Exposition, vol. 54945, pp. 91-99. 2011.
- Malik, Arif, John Sanders, Ramana Grandhi, and Mark Zipf. “Reliability-Based Optimal Cluster Mill Pass Scheduling.” In ASME International Mechanical Engineering Congress and Exposition, vol. 54952, pp. 719-727. 2011.
- Hinton, J., Malik, A., Grandhi, R., ”Filtering Winding Effects from Control Systems in Cold Rolling Operations,” Proceedings of the AIST Annual Conference, May 2-5, 2011, Indianapolis, IN.
- Hinton, Jantzen L., Paul A. Gross, Ramana V. Grandhi, and Arif S. Malik. “Using an Airy Function to Predict Stresses in Wound Metal Strip Having Asymmetric Thickness Profile.” In International Manufacturing Science and Engineering Conference, vol. 49477, pp. 113-120. 2010.
- Malik, Arif S., and Ramana V. Grandhi. “A computational method to predict strip profile in rolling mills.” Journal of Materials Processing Technology 206, no. 1-3 (2008): 263-274.
- Malik, A., Grandhi, R., “Computational Methods for Controlling Strip Profile and Flatness in Rolling Mills,” APCOM ’07 in conjunction with EPMESC XI, Kyoto, Japan, December 3-6, 2007.
- Malik, Arif S., Ramana V. Grandhi, and Mark E. Zipf. “Optimal cluster mill pass scheduling with an accurate and rapid new strip crown model.” In AIP Conference Proceedings, vol. 908, no. 1, pp. 1041-1046. American Institute of Physics, 2007.
- Malik, Arif S., and Ramana V. Grandhi. “Validation of an Accurate and Rapid New Model for Strip Crown.” In AIST Proceedings: AISTech 2007. 2007.
- Guo, R., and A. Malik. “Development of New Crown/Shape Control Model for Cluster Mills.” In AISTECH Conference Proceedings, vol. 2, p. 43. Association for Iron & Steel Technology, 2004.
- Malik, Arif S., and Remn-Min Guo. “Roll profile optimization using the linear programming method.” AISE steel technology 80, no. 4 (2003): 46-53.
